conky

conky − A system monitor for X originally based on the torsmo code, but more kickass. It just keeps on given’er. Yeah.

conky [ options ]

Conky is a system monitor for X originally based on torsmo. Since its inception, Conky has changed significantly from its predecessor, while maintaining simplicity and configurability. Conky can display just about anything, either on your root desktop or in its own window. Not only does Conky have many built-in objects, it can also display just about any piece of information by using scripts and other external programs.

Conky has more than 250 built in objects, including support for a plethora of OS stats (uname, uptime, CPU usage, mem usage, disk usage, "top" like process stats, and network monitoring, just to name a few), built in IMAP and POP3 support, built in support for many popular music players (MPD, XMMS2, BMPx, Audacious), and much much more. Conky can display this info either as text, or using simple progress bars and graph widgets, with different fonts and colours.

We are always looking for help, whether its reporting bugs, writing patches, or writing docs. Please use the facilities at SourceForge to make bug reports, feature requests, and submit patches, or stop by #conky on irc.freenode.net if you have questions or want to contribute.

Thanks for your interest in Conky.

For users compiling from source on a binary distro, make sure you have the X development libraries installed (Unless you provide configure with "--disable-x11"). This should be a package along the lines of "libx11-dev" or "xorg-x11-dev" for X11 libs, and similar "-dev" format for the other libs required (depending on your configure options). You should be able to see which extra packages you need to install by reading errors that you get from ’./configure’. You can enable/disable stuff by giving options to configure, but be careful with disabling. For example: with --disable-math you won’t get errors but logarithmic graphs will be normal graphs and gauges will miss their line.

Conky has (for some time) been available in the repositories of most popular distributions. Here are some installation instructions for a few:

Gentoo users -- Conky is in Gentoo’s Portage... simply use "emerge app-admin/conky" for installation.

Debian, etc. users -- Conky should be in your repositories, and can be installed by doing "aptitude install conky".

Example to compile and run Conky with all optional components (note that some configure options may differ for your system):

sh autogen.sh # Only required if building from the git repo

./configure −−prefix=/usr −−mandir=/usr/share/man −−infodir=/usr/share/info −−datadir=/usr/share −−sysconfdir=/etc −−localstatedir=/var/lib −−disable−own−window −−enable−audacious[=yes|no|legacy] −−enable−bmpx −−disable−hddtemp −−disable−mpd −−enable−xmms2 −−disable−portmon −−disable−network −−enable−debug −−disable−x11 −−disable−double−buffer −−disable−xdamage −−disable−xft

make

make install # Optional

src/conky

Conky has been tested to be compatible with C99 C, however it has not been tested with anything other than gcc, and is not guaranteed to work with other compilers.

Conky is generally very good on resources. That said, the more you try to make Conky do, the more resources it is going to consume.

An easy way to force Conky to reload your ~/.conkyrc: "killall -SIGUSR1 conky". Saves you the trouble of having to kill and then restart. You can now also do the same with SIGHUP.

Command line options override configurations defined in configuration file.

−v | −V | −−version

Prints version and exits

−q | −−quiet

Run Conky in ’quiet mode’ (ie. no output)

−D | −−debug

Increase debugging output, ie. -DD for more debugging

−a | −−alignment= ALIGNMENT

Text alignment on screen, {top,bottom,middle}_{left,right,middle} or none. Can also be abbreviated with first chars of position, ie. tr for top_right.

−b | −−double−buffer

Use double buffering (eliminates "flicker")

−c | −−config= FILE

Config file to load instead of $HOME/.conkyrc

−C | −−print−config

Print builtin default config to stdout. See also the section EXAMPLES for more information.

−d | −−daemonize

Daemonize Conky, aka fork to background

−f | −−font= FONT

Font to use

−h | −−help

Prints command line help and exits

−o | −−own−window

Create own window to draw

−t | −−text= TEXT

Text to render, remember single quotes, like -t ’ $uptime ’

−p | −−pause= SECONDS

Time to pause before actually starting Conky

−u | −−interval= SECONDS

Update interval

−w | −−window−id= WIN_ID

Window id to draw

−X | −−display= DISPLAY

X11 display to use

−x X_COORDINATE

X position

−y Y_COORDINATE

Y position

−i COUNT

Number of times to update Conky (and quit)

Default configuration file location is $HOME/.conkyrc or ${sysconfdir}/conky/conky.conf. On most systems, sysconfdir is /etc, and you can find the sample config file there (/etc/conky/conky.conf).

You might want to copy it to $HOME/.conkyrc and then start modifying it. Other configs can be found at http://conky.sf.net/

TEXT

After this begins text to be formatted on screen. Backslash (\) escapes newlines in the text section. This can be useful for cleaning up config files where conky is used to pipe input to dzen2.

alignment

Aligned position on screen, may be top_left, top_right, top_middle, bottom_left, bottom_right, bottom_middle, middle_left, middle_middle, middle_right, or none (also can be abreviated as tl, tr, tm, bl, br, bm, ml, mm, mr). See also gap_x and gap_y.

append_file

Append the file given as argument.

background

Boolean value, if true, Conky will be forked to background when started.

border_inner_margin

Inner border margin in pixels (the margin between the border and text).

border_outer_margin

Outer border margin in pixels (the margin between the border and the edge of the window).

border_width

Border width in pixels.

colorN

Predefine a color for use inside TEXT segments. Substitute N by a digit between 0 and 9, inclusively. When specifying the color value in hex, omit the leading hash (#).

cpu_avg_samples

The number of samples to average for CPU monitoring.

default_bar_size

Specify a default width and height for bars. Example: ’default_bar_size 0 6’. This is particularly useful for execbar and execibar as they do not take size arguments.

default_color

Default color and border color

default_gauge_size

Specify a default width and height for gauges. Example: ’default_gauge_size 25 25’. This is particularly useful for execgauge and execigauge as they do not take size arguments

default_graph_size

Specify a default width and height for graphs. Example: ’default_graph_size 0 25’. This is particularly useful for execgraph and execigraph as they do not take size arguments

default_outline_color

Default outline color

default_shade_color

Default shading color and border’s shading color

disable_auto_reload

Enable to disable the inotify-based auto config reload feature.

diskio_avg_samples

The number of samples to average for disk I/O monitoring.

display

Specify an X display to connect to.

double_buffer

Use the Xdbe extension? (eliminates flicker) It is highly recommended to use own window with this one so double buffer won’t be so big.

draw_borders

Draw borders around text?

draw_graph_borders

Draw borders around graphs?

draw_outline

Draw outlines?

draw_shades

Draw shades?

extra_newline

Put an extra newline at the end when writing to stdout, useful for writing to awesome’s wiboxes.

font

Font name in X, xfontsel can be used to get a nice font

format_human_readable

If enabled, values which are in bytes will be printed in human readable format (i.e., KiB, MiB, etc). If disabled, the number of bytes is printed instead.

gap_x

Gap, in pixels, between right or left border of screen, same as passing -x at command line, e.g. gap_x 10. For other position related stuff, see ’alignment’.

gap_y

Gap, in pixels, between top or bottom border of screen, same as passing -y at command line, e.g. gap_y 10. For other position related stuff, see ’alignment’.

hddtemp_host

Hostname to connect to for hddtemp objects. Defaults to "127.0.0.1".

hddtemp_port

Port to use for hddtemp connections. Defaults to 7634.

if_up_strictness

How strict should if_up be when testing an interface for being up? The value is one of up, link or address, to check for the interface being solely up, being up and having link or being up, having link and an assigned IP address.

imap

Default global IMAP server. Arguments are: "host user pass [-i interval (in seconds)] [-f ’folder’] [-p port] [-e ’command’] [-r retries]". Default port is 143, default folder is ’INBOX’, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

imlib_cache_flush_interval

Interval (in seconds) to flush Imlib2 cache.

imlib_cache_size

Imlib2 image cache size, in bytes. Defaults to 4MiB. Increase this value if you use $image lots. Set to 0 to disable the image cache.

lua_draw_hook_post function_name [function arguments]

This function, if defined, will be called by Conky through each iteration after drawing to the window. Requires X support. Takes any number of optional arguments. Use this hook for drawing things on top of what Conky draws. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you place ’conky_’ in front of it yourself.

lua_draw_hook_pre function_name [function arguments]

This function, if defined, will be called by Conky through each iteration before drawing to the window. Requires X support. Takes any number of optional arguments. Use this hook for drawing things on top of what Conky draws. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you place ’conky_’ in front of it yourself.

lua_load

Loads the Lua scripts separated by spaces.

lua_shutdown_hook function_name [function arguments]

This function, if defined, will be called by Conky at shutdown or when the configuration is reloaded. Use this hook to clean up after yourself, such as freeing memory which has been allocated by external libraries via Lua. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you place ’conky_’ in front of it yourself.

lua_startup_hook function_name [function arguments]

This function, if defined, will be called by Conky at startup or when the configuration is reloaded. Use this hook to initialize values, or for any run-once applications. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you place ’conky_’ in front of it yourself.

mail_spool

Mail spool for mail checking

max_port_monitor_connections

Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)

max_specials

Maximum number of special things, e.g. fonts, offsets, aligns, etc. (default is 512)

max_text_width width

When a line in the output contains ’width’ chars and the end isn’t reached, the next char will start on a new line. If you want to make sure that lines don’t get broken, set ’width’ to 0

max_user_text bytes

Maximum size of user text buffer, i.e. layout below TEXT line in config file (default is 16384 bytes)

maximum_width pixels

Maximum width of window

minimum_size width (height)

Minimum size of window

mpd_host

Host of MPD server

mpd_password

MPD server password

mpd_port

Port of MPD server

music_player_interval

Music player thread update interval (defaults to Conky’s update interval)

net_avg_samples

The number of samples to average for net data

no_buffers

Subtract (file system) buffers from used memory?

nvidia_display

The display that the nvidia variable will use (defaults to the value of the display variable)

out_to_console

Print text to stdout.

out_to_ncurses

Print text in the console, but use ncurses so that conky can print the text of a new update over the old text. (In the future this will provide more useful things)

out_to_stderr

Print text to stderr.

out_to_x

When set to no, there will be no output in X (useful when you also use things like out_to_console). If you set it to no, make sure that it’s placed before all other X-related setting (take the first line of your configfile to be sure). Default value is yes

override_utf8_locale

Force UTF8? requires XFT

overwrite_file

Overwrite the file given as argument.

own_window

Boolean, create own window to draw?

own_window_class

Manually set the WM_CLASS name. Defaults to "Conky".

own_window_colour colour

If own_window_transparent no, set a specified background colour (defaults to black). Takes either a hex value (e.g. ffffff, note the lack of ’#’) or a valid RGB name (see /usr/lib/X11/rgb.txt)

own_window_hints undecorated,below,above,sticky,skip_taskbar,skip_pager

If own_window is yes, you may use these window manager hints to affect the way Conky displays. Notes: Use own_window_type desktop as another way to implement many of these hints implicitly. If you use own_window_type override, window manager hints have no meaning and are ignored.

own_window_title

Manually set the window name. Defaults to "<hostname> - conky".

own_window_argb_visual

Boolean, use ARGB visual? ARGB can be used for real transparency, note that a composite manager is required for real transparency. This option will not work as desired (in most cases) in conjunction with ’own_window_type override’.

own_window_argb_value

When ARGB visuals are enabled, this use this to modify the alpha value used. Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.

own_window_transparent

Boolean, set transparency? If ARGB visual is enabled, sets background opacity to 0%.

own_window_type

if own_window is yes, you may specify type normal, desktop, dock, panel or override (default: normal). Desktop windows are special windows that have no window decorations; are always visible on your desktop; do not appear in your pager or taskbar; and are sticky across all workspaces. Panel windows reserve space along a desktop edge, just like panels and taskbars, preventing maximized windows from overlapping them. The edge is chosen based on the alignment option. Override windows are not under the control of the window manager. Hints are ignored. This type of window can be useful for certain situations.

pad_percents

Pad percentages to this many decimals (0 = no padding)

pop3

Default global POP3 server. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e ’command’] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

short_units

Shortens units to a single character (kiB->k, GiB->G, etc.). Default is off.

show_graph_range

Shows the time range covered by a graph.

show_graph_scale

Shows the maximum value in scaled graphs.

stippled_borders

Border stippling (dashing) in pixels

temperature_unit

Desired output unit of all objects displaying a temperature. Parameters are either "fahrenheit" or "celsius". The default unit is degree Celsius.

templateN

Define a template for later use inside TEXT segments. Substitute N by a digit between 0 and 9, inclusively. The value of the variable is being inserted into the stuff below TEXT at the corresponding position, but before some substitutions are applied:

’\n’ -> newline
’\\’ -> backslash
’\ ’ -> space
’\N’ -> template argument N

text_buffer_size bytes

Size of the standard text buffer (default is 256 bytes). This buffer is used for intermediary text, such as individual lines, output from $exec vars, and various other variables. Increasing the size of this buffer can drastically reduce Conky’s performance, but will allow for more text display per variable. The size of this buffer cannot be smaller than the default value of 256 bytes.

times_in_seconds

If true, variables that output times output a number that represents seconds. This doesn’t affect $time, $tztime and $utime

top_cpu_separate

If true, cpu in top will show usage of one processor’s power. If false, cpu in top will show the usage of all processors’ power combined.

top_name_width

Width for $top name value (defaults to 15 characters).

total_run_times

Total number of times for Conky to update before quitting. Zero makes Conky run forever

update_interval seconds

Update interval

update_interval_on_battery seconds

Update interval when running on batterypower

uppercase

Boolean value, if true, text is rendered in upper case

use_spacer

Adds spaces around certain objects to stop them from moving other things around. Arguments are left, right, and none (default). The old true/false values are deprecated and default to right/none respectively. Note that this only helps if you are using a mono font, such as Bitstream Vera Sans Mono.

use_xft

Use Xft (anti-aliased font and stuff)

xftalpha

Alpha of Xft font. Must be a value at or between 1 and 0.

xftfont

Xft font to use.

Colours are parsed using XParsecolor(), there might be a list of them: /usr/share/X11/rgb.txt. Colour can be also in #rrggbb format (hex).

Some objects may create threads, and sometimes these threads will not be destroyed until Conky terminates. There is no way to destroy or clean up threads while Conky is running. For example, if you use an MPD variable, the MPD thread will keep running until Conky dies. Some threaded objects will use one of the parameters as a ’key’, so that you only have 1 relevant thread running (for example, the $curl, $rss and $weather objects launch one thread per URI).

acpiacadapter (adapter)

ACPI ac adapter state. On linux, the adapter option specifies the subfolder of /sys/class/power_supply containing the state information (tries "AC" and "ADP1" if there is no argument given). Non-linux systems ignore it.

acpifan

ACPI fan state

acpitemp

ACPI temperature in C.

addr (interface)

IP address for an interface, or "No Address" if no address is assigned.

addrs (interface)

IP addresses for an interface (if one - works like addr). Linux only.

adt746xcpu

CPU temperature from therm_adt746x

adt746xfan

Fan speed from therm_adt746x

alignc (num)

Align text to centre

alignr (num)

Right-justify text, with space of N

apcupsd host port

Sets up the connection to apcupsd daemon. Prints nothing, defaults to localhost:3551

apcupsd_cable

Prints the UPS connection type.

apcupsd_charge

Current battery capacity in percent.

apcupsd_lastxfer

Reason for last transfer from line to battery.

apcupsd_linev

Nominal input voltage.

apcupsd_load

Current load in percent.

apcupsd_loadbar

Bar showing current load.

apcupsd_loadgauge (height),(width)

Gauge that shows current load.

apcupsd_loadgraph (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

History graph of current load.

apcupsd_model

Prints the model of the UPS.

apcupsd_name

Prints the UPS user-defined name.

apcupsd_status

Prints current status (on-line, on-battery).

apcupsd_temp

Current internal temperature.

apcupsd_timeleft

Time left to run on battery.

apcupsd_upsmode

Prints the UPS mode (e.g. standalone).

apm_adapter

Display APM AC adapter status (FreeBSD only)

apm_battery_life

Display APM battery life in percent (FreeBSD only)

apm_battery_time

Display remaining APM battery life in hh:mm:ss or "unknown" if AC adapterstatus is on-line or charging (FreeBSD only)

audacious_bar (height),(width)

Progress bar

audacious_bitrate

Bitrate of current tune

audacious_channels

Number of audio channels of current tune

audacious_filename

Full path and filename of current tune

audacious_frequency

Sampling frequency of current tune

audacious_length

Total length of current tune as MM:SS

audacious_length_seconds

Total length of current tune in seconds

audacious_main_volume

The current volume fetched from Audacious

audacious_playlist_length

Number of tunes in playlist

audacious_playlist_position

Playlist position of current tune

audacious_position

Position of current tune (MM:SS)

audacious_position_seconds

Position of current tune in seconds

audacious_status

Player status (Playing/Paused/Stopped/Not running)

audacious_title (max length)

Title of current tune with optional maximum length specifier

battery (num)

Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0).

battery_bar (height),(width) (num)

Battery percentage remaining of ACPI battery in a bar. ACPI battery number can be given as argument (default is BAT0).

battery_percent (num)

Battery percentage remaining for ACPI battery. ACPI battery number can be given as argument (default is BAT0).

battery_short (num)

Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0). This mode display a short status, which means that C is displayed instead of charging, D for discharging, F for full, N for not present, E for empty and U for unknown.

battery_time (num)

Battery charge/discharge time remaining of ACPI battery. ACPI battery number can be given as argument (default is BAT0).

blink text_and_other_conky_vars

Let ’text_and_other_conky_vars’ blink on and off.

bmpx_album

Album in current BMPx track

bmpx_artist

Artist in current BMPx track

bmpx_bitrate

Bitrate of the current BMPx track

bmpx_title

Title of the current BMPx track

bmpx_track

Track number of the current BMPx track

bmpx_uri

URI of the current BMPx track

buffers

Amount of memory buffered

cached

Amount of memory cached

cmdline_to_pid string

PID of the first process that has string in it’s commandline

color (color)

Change drawing color to ’color’ which is a name of a color or a hexcode preceded with # (for example #0A1B2C ). If you use ncurses only the following colors are supported: red,green,yellow,blue,magenta,cyan,black,white.

colorN

Change drawing color to colorN configuration option, where N is a digit between 0 and 9, inclusively.

combine var1 var2

Places the lines of var2 to the right of the lines of var1 separated by the chars that are put between var1 and var2. For example: ${combine ${head /proc/cpuinfo 2} - ${head /proc/meminfo 1}} gives as output "cpuinfo_line1 - meminfo_line1" on line 1 and "cpuinfo_line2 -" on line 2. $combine vars can also be nested to place more vars next to each other.

conky_build_arch

CPU architecture Conky was built for

conky_build_date

Date Conky was built

conky_version

Conky version

cpu (cpuN)

CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu cpuX} (X >= 1) are individual CPUs.

cpubar (cpuN) (height),(width)

Bar that shows CPU usage, height is bar’s height in pixels. See $cpu for more info on SMP.

cpugauge (cpuN) (height),(width)

Elliptical gauge that shows CPU usage, height and width are gauge’s vertical and horizontal axis respectively. See $cpu for more info on SMP.

cpugraph (cpuN) (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

curl url (interval_in_minutes)

Download data from URI using Curl at the specified interval. The interval may be a floating point value greater than 0, otherwise defaults to 15 minutes. Most useful when used in conjunction with Lua and the Lua API. This object is threaded, and once a thread is created it can’t be explicitly destroyed. One thread will run for each URI specified. You can use any protocol that Curl supports.

desktop

Number of the desktop on which conky is running or the message "Not running in X" if this is the case.

desktop_name

Name of the desktop on which conky is running or the message "Not running in X" if this is the case.

desktop_number

Number of desktops or the message "Not running in X" if this is the case.

disk_protect device

Disk protection status, if supported (needs kernel-patch). Prints either "frozen" or "free " (note the padding).

diskio (device)

Displays current disk IO. Device is optional, and takes the form of sda for /dev/sda. Individual partitions are allowed.

diskio_read (device)

Displays current disk IO for reads. Device as in diskio.

diskio_write (device)

Displays current disk IO for writes. Device as in diskio.

diskiograph (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

diskiograph_read (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Disk IO graph for reads, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

diskiograph_write (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Disk IO graph for writes, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

downspeed (net)

Download speed in suitable IEC units

downspeedf (net)

Download speed in KiB with one decimal

downspeedgraph (netdev) (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

draft_mails (maildir) (interval)

Number of mails marked as draft in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1.

else

Text to show if any of the above are not true

endif

Ends an $if block.

entropy_avail

Current entropy available for crypto freaks

entropy_bar (height),(width)

Normalized bar of available entropy for crypto freaks

entropy_perc

Percentage of entropy available in comparison to the poolsize

entropy_poolsize

Total size of system entropy pool for crypto freaks

eval string

Evaluates given string according to the rules of TEXT interpretation, i.e. parsing any contained text object specifications into their output, any occuring ’$$’ into a single ’$’ and so on. The output is then being parsed again.

eve api_userid api_key character_id

Fetches your currently training skill from the Eve Online API servers (http://www.eve-online.com/) and displays the skill along with the remaining training time.

exec command

Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I’d recommend coding wanted behaviour in C and posting a patch.

execbar command

Same as exec, except if the first value return is a value between 0-100, it will use that number for a bar. The size for bars can be controlled via the default_bar_size config setting.

execgauge command

Same as exec, except if the first value returned is a value between 0-100, it will use that number for a gauge. The size for gauges can be controlled via the default_gauge_size config setting.

execgraph (−t) (−l) command

Same as execbar, but graphs values. Uses a logaritmic scale when the log option (-l switch) is given (to see small numbers). Values still have to be between 0 and 100. The size for graphs can be controlled via the default_graph_size config setting. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). If -t or -l is your first argument, you may need to preceed it by a space (’ ’). You may also use double-quotes around the exec argument should you need to execute a command with spaces. For example, ${execgraph "date +’%S’"} to execute ‘date +’%S’‘ and graph the result. Without quotes, it would simply print the result of ‘date‘.

execi interval command

Same as exec but with specific interval. Interval can’t be less than update_interval in configuration. See also $texeci

execibar interval command

Same as execbar, except with an interval

execigauge interval command

Same as execgauge, but takes an interval arg and gauges values.

execigraph interval (−t) (−l) command

Same as execgraph, but takes an interval arg and graphs values. If -t or -l is your first argument, you may need to preceed it by a space (’ ’).

execp command

Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I’d recommend coding wanted behaviour in C and posting a patch. This differs from $exec in that it parses the output of the command, so you can insert things like ${color red}hi!${color} in your script and have it correctly parsed by Conky. Caveats: Conky parses and evaluates the output of $execp every time Conky loops, and then destroys all the objects. If you try to use anything like $execi within an $execp statement, it will functionally run at the same interval that the $execp statement runs, as it is created and destroyed at every interval.

execpi interval command

Same as execp but with specific interval. Interval can’t be less than update_interval in configuration. Note that the output from the $execpi command is still parsed and evaluated at every interval.

flagged_mails (maildir) (interval)

Number of mails marked as flagged in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1.

font (font)

Specify a different font. This new font will apply to the current line and everything following. You can use a $font with no arguments to change back to the default font (much like with $color)

format_time seconds format

Format time given in seconds. This var only works when the times_in_seconds configuration setting is on. Format is a string that should start and end with a "-char. The "-chars are not part of the output, \w,\d,\h,\m,\s,\(,\) and \\ are replaced by weeks,days,hours,minutes,seconds,(,) and \. If you leave out a unit, it’s value will be expressed in the highest unite lower then the one left out. Text between ()-chars will not be visible if a replaced unit in this text is 0. If seconds is a decimal number then you can see the numbers behind the point by using \S followed by a number that specifies the amount of digits behind the point that you want to see (maximum 9). You can also place a ’x’ behind \S so you have all digits behind the point and no trailing zero’s. (also maximum 9)

forwarded_mails (maildir) (interval)

Number of mails marked as forwarded in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1.

freq (n)

Returns CPU #n’s frequency in MHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.

freq_g (n)

Returns CPU #n’s frequency in GHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.

fs_bar (height),(width) fs

Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system.

fs_bar_free (height),(width) fs

Bar that shows how much space is free on a file system. height is the height in pixels. fs is any file on that file system.

fs_free (fs)

Free space on a file system available for users.

fs_free_perc (fs)

Free percentage of space on a file system available for users.

fs_size (fs)

File system size.

fs_type (fs)

File system type.

fs_used (fs)

File system used space.

fs_used_perc (fs)

Percent of file system used space.

goto x

The next element will be printed at position ’x’.

gw_iface

Displays the default route’s interface or "multiple"/"none" accordingly.

gw_ip

Displays the default gateway’s IP or "multiple"/"none" accordingly.

hddtemp (dev)

Displays temperature of a selected hard disk drive as reported by the hddtemp daemon. Use hddtemp_host and hddtemp_port to specify a host and port for all hddtemp objects. If no dev parameter is given, the first disk returned by the hddtemp daemon is used.

head logfile lines (next_check)

Displays first N lines of supplied text file. The file is checked every ’next_check’ update. If next_check is not supplied, Conky defaults to 2. Max of 30 lines can be displayed, or until the text buffer is filled.

hr (height)

Horizontal line, height is the height in pixels

hwmon (dev) type n (factor offset)

Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one hwmon device. Parameter type is either ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ meaning temperature. Parameter n is number of the sensor. See /sys/class/hwmon/ on your local computer. The optional arguments ’factor’ and ’offset’ allow precalculation of the raw input, which is being modified as follows: ’input = input * factor + offset’. Note that they have to be given as decimal values (i.e. contain at least one decimal place).

i2c (dev) type n (factor offset)

I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one I2C device. Parameter type is either ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ meaning temperature. Parameter n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer. The optional arguments ’factor’ and ’offset’ allow precalculation of the raw input, which is being modified as follows: ’input = input * factor + offset’. Note that they have to be given as decimal values (i.e. contain at least one decimal place).

i8k_ac_status

If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in /proc/i8k (translated to human-readable). Beware that this is by default not enabled by i8k itself.

i8k_bios

If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k.

i8k_buttons_status

If running the i8k kernel driver for Inspiron laptops, displays the volume buttons status as listed in /proc/i8k.

i8k_cpu_temp

If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in Celsius, as reported by /proc/i8k.

i8k_left_fan_rpm

If running the i8k kernel driver for Inspiron laptops, displays the left fan’s rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.

i8k_left_fan_status

If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.

i8k_right_fan_rpm

If running the i8k kernel driver for Inspiron laptops, displays the right fan’s rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.

i8k_right_fan_status

If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.

i8k_serial

If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k.

i8k_version

If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k.

ibm_brightness

If running the IBM ACPI, displays the brigtness of the laptops’s LCD (0-7).

ibm_fan

If running the IBM ACPI, displays the fan speed.

ibm_temps N

If running the IBM ACPI, displays the temperatures from the IBM temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the GPU.

ibm_volume

If running the IBM ACPI, displays the "master" volume, controlled by the volume keys (0-14).

iconv_start codeset_from codeset_to

Convert text from one codeset to another using GNU iconv. Needs to be stopped with iconv_stop.

iconv_stop

Stop iconv codeset conversion.

if_empty (var)

if conky variable VAR is empty, display everything between $if_empty and the matching $endif

if_existing file (string)

if FILE exists, display everything between if_existing and the matching $endif. The optional second paramater checks for FILE containing the specified string and prints everything between $if_existing and the matching $endif.

if_gw

if there is at least one default gateway, display everything between $if_gw and the matching $endif

if_match expression

Evaluates the given boolean expression, printing everything between $if_match and the matching $endif depending on whether the evaluation returns true or not. Valid expressions consist of a left side, an operator and a right side. Left and right sides are being parsed for contained text objects before evaluation. Recognised left and right side types are:

doubleArgument consists of only digits and a single dot.
longArgument consists of only digits.
stringArgument is enclosed in quotation marks (")

Valid operands are: ’>’, ’<’, ’>=’, ’<=’, ’==’, ’!=’.

if_mixer_mute (mixer)

If mixer exists, display everything between $if_mixer_mute and the matching $endif. If no mixer is specified, "Master" is used.

if_mounted (mountpoint)

if MOUNTPOINT is mounted, display everything between $if_mounted and the matching $endif

if_mpd_playing

if mpd is playing or paused, display everything between $if_mpd_playing and the matching $endif

if_running (process)

if PROCESS is running, display everything $if_running and the matching $endif. This uses the ‘‘pidof’’ command, so the -x switch is also supported.

if_smapi_bat_installed (INDEX)

when using smapi, if the battery with index INDEX is installed, display everything between $if_smapi_bat_installed and the matching $endif

if_up (interface)

if INTERFACE exists and is up, display everything between $if_up and the matching $endif

if_updatenr (updatenr)

If it’s the UPDATENR-th time that conky updates, display everything between $if_updatenr and the matching $endif. The counter resets when the highest UPDATENR is reached. Example : "{$if_updatenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr 4}$endif" shows foo 25% of the time followed by bar 25% of the time followed by nothing the other half of the time.

if_xmms2_connected

Display everything between $if_xmms2_connected and the matching $endif if xmms2 is running.

image <path to image> (−p x,y) (−s WxH) (−n) (−f interval)

Renders an image from the path specified using Imlib2. Takes 4 optional arguments: a position, a size, a no-cache switch, and a cache flush interval. Changing the x,y position will move the position of the image, and changing the WxH will scale the image. If you specify the no-cache flag (-n), the image will not be cached. Alternately, you can specify the -f int switch to specify a cache flust interval for a particular image. Example: ${image /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will render ’cheeseburger.jpg’ at (20,20) scaled to 200x200 pixels. Conky does not make any attempt to adjust the position (or any other formatting) of images, they are just rendered as per the arguments passed. The only reason $image is part of the TEXT section, is to allow for runtime modifications, through $execp $lua_parse, or some other method.

imap_messages (args)

Displays the number of messages in your global IMAP inbox by default. You can define individual IMAP inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f ’folder’] [-p port] [-e ’command’] [-r retries]". Default port is 143, default folder is ’INBOX’, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

imap_unseen (args)

Displays the number of unseen messages in your global IMAP inbox by default. You can define individual IMAP inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f ’folder’] [-p port] [-e ’command’] [-r retries]". Default port is 143, default folder is ’INBOX’, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

include path

Loads the configfile at path, places the configsettings behind the configsettings in the orginal config and places the vars where the includevar stood.

ioscheduler disk

Prints the current ioscheduler used for the given disk name (i.e. e.g. "hda" or "sdb")

kernel

Kernel version

laptop_mode

The value of /proc/sys/vm/laptop_mode

lines textfile

Displays the number of lines in the given file

loadavg (1|2|3)

System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes. Without argument, prints all three values separated by whitespace.

loadgraph (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Load1 average graph, similar to xload, with optional colours in hex, minus the #. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

lua function_name (function parameters)

Executes a Lua function with given parameters, then prints the returned string. See also ’lua_load’ on how to load scripts. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you put you place ’conky_’ in front of it yourself.

lua_bar (height, width) function_name (function parameters)

Executes a Lua function with given parameters and draws a bar. Expects result value to be an integer between 0 and 100. See also ’lua_load’ on how to load scripts. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you put you place ’conky_’ in front of it yourself.

lua_gauge (height, width) function_name (function parameters)

Executes a Lua function with given parameters and draws a gauge. Expects result value to be an integer between 0 and 100. See also ’lua_load’ on how to load scripts. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you put you place ’conky_’ in front of it yourself.

lua_graph function_name (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Executes a Lua function with and draws a graph. Expects result value to be any number, and by default will scale to show the full range. See also ’lua_load’ on how to load scripts. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you put you place ’conky_’ in front of it yourself.

lua_parse function_name (function parameters)

Executes a Lua function with given parameters as per $lua, then parses and prints the result value as per the syntax for Conky’s TEXT section. See also ’lua_load’ on how to load scripts. Conky puts ’conky_’ in front of function_name to prevent accidental calls to the wrong function unless you put you place ’conky_’ in front of it yourself.

machine

Machine, i686 for example

mails (mailbox) (interval)

Mail count in the specified mailbox or your mail spool if not. Both mbox and maildir type mailboxes are supported. You can use a program like fetchmail to get mails from some server using your favourite protocol. See also new_mails.

mboxscan (−n number of messages to print) (−fw from width) (−sw subject width) mbox

Print a summary of recent messages in an mbox format mailbox. mbox parameter is the filename of the mailbox (can be encapsulated using ’"’, ie. ${mboxscan -n 10 "/home/brenden/some box"}

mem

Amount of memory in use

membar (height),(width)

Bar that shows amount of memory in use

memeasyfree

Amount of free memory including the memory that is very easily freed (buffers/cache)

memfree

Amount of free memory

memgauge (height),(width)

Gauge that shows amount of memory in use (see cpugauge)

memgraph (height),(width) (gradient colour 1) (gradient colour 2) (scale) (−t) (−l)

Memory usage graph. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch ’-t’ to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).

memmax

Total amount of memory

memperc

Percentage of memory in use

mixer (device)

Prints the mixer value as reported by the OS. Default mixer is "Master", but you can specify one of the available ALSA Simple mixer controls. You can find the list of those available on your system using amixer.

mixerbar (device)

Displays mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.

mixerl (device)

Prints the left channel mixer value as reported by the OS. See docs for $mixer for details on arguments.

mixerlbar (device)

Displays the left channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.

mixerr (device)

Prints the right channel mixer value as reported by the OS. See docs for $mixer for details on arguments.

mixerrbar (device)

Displays the right channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.

moc_album

Album of the current MOC song

moc_artist

Artist of the current MOC song

moc_bitrate

Bitrate in the current MOC song

moc_curtime

Current time of the current MOC song

moc_file

File name of the current MOC song

moc_rate

Rate of the current MOC song

moc_song

The current song name being played in MOC.

moc_state

Current state of MOC; playing, stopped etc.

moc_timeleft

Time left in the current MOC song

moc_title

Title of the current MOC song

moc_totaltime

Total length of the current MOC song

monitor

Number of the monitor on which conky is running or the message "Not running in X" if this is the case.

monitor_number

Number of monitors or the message "Not running in X" if this is the case.

mpd_album

Album in current MPD song

mpd_artist

Artist in current MPD song must be enabled at compile

mpd_bar (height),(width)

Bar of mpd’s progress

mpd_bitrate

Bitrate of current song

mpd_elapsed

Song’s elapsed time

mpd_file

Prints the file name of the current MPD song

mpd_length

Song’s length

mpd_name

Prints the MPD name field

mpd_percent

Percent of song’s progress

mpd_random

Random status (On/Off)

mpd_repeat

Repeat status (On/Off)

mpd_smart (max length)

Prints the song name in either the form "artist - title" or file name, depending on whats available

mpd_status

Playing, stopped, et cetera.

mpd_title (max length)

Title of current MPD song

mpd_track

Prints the MPD track field

mpd_vol

MPD’s volume

nameserver (index)

Print a nameserver from /etc/resolv.conf. Index starts at and defaults to 0.

new_mails (mailbox) (interval)

Unread mail count in the specified mailbox or mail spool if not. Both mbox and maildir type mailboxes are supported.

nodename

Hostname

nodename_short

Short hostname (same as ’hostname -s’ shell command).

nvidia threshold temp ambient gpufreq memfreq imagequality

Nvidia graficcard support for the XNVCtrl library. Each option can be shortened to the least significant part. Temperatures are printed as float, all other values as integer.

threshold The thresholdtemperature at which the gpu slows down
temp Gives the gpu current temperature
ambient Gives current air temperature near GPU case
gpufreq Gives the current gpu frequency
memfreq Gives the current mem frequency
imagequality Which imagequality should be chosen by OpenGL applications

offset (pixels)

Move text over by N pixels. See also $voffset.

outlinecolor (color)

Change outline color

pb_battery item

If running on Apple powerbook/ibook, display information on battery status. The item parameter specifies, what information to display. Exactly one item must be specified. Valid items are:

status Display if battery is fully charged, charging, discharging or absent (running on AC)
percent Display charge of battery in percent, if charging or discharging. Nothing will be displayed, if battery is fully charged or absent.
time Display the time remaining until the battery will be fully charged or discharged at current rate. Nothing is displayed, if battery is absent or if it’s present but fully charged and not discharging.

pid_chroot pid

Directory used as rootdirectory by the process (this will be "/" unless the process did a chroot syscall)

pid_cmdline pid

Command line this process was invoked with

pid_cwd pid

Current working directory of the process

pid_environ pid varname

Contents of a environment-var of the process

pid_environ_list pid

List of environment-vars that the process can see

pid_exe pid

Path to executed command that started the process

pid_nice pid

The nice value of the process

pid_openfiles pid

List of files that the process has open

pid_parent pid

The pid of the parent of the process

pid_priority pid

The priority of the process (see ’priority’ in "man 5 proc")

pid_read pid

Total number of bytes read by the process

pid_state pid

State of the process

pid_state_short pid

One of the chars in "RSDZTW" representing the state of the process where R is running, S is sleeping in an interruptible wait, D is waiting in uninterruptible disk sleep, Z is zombie, T is traced or stopped (on a signal), and W is paging

pid_stderr pid

Filedescriptor binded to the STDERR of the process

pid_stdin pid

Filedescriptor binded to the STDIN of the process

pid_stdout pid

Filedescriptor binded to the STDOUT of the process

pid_threads pid

Number of threads in process containing this thread

pid_thread_list pid

List with pid’s from threads from this process

pid_time_kernelmode pid

Amount of time that the process has been scheduled in kernel mode in seconds

pid_time_usermode pid

Amount of time that the process has been scheduled in user mode in seconds

pid_time pid

Sum of $pid_time_kernelmode and $pid_time_usermode

pid_uid pid

The real uid of the process

pid_euid pid

The effective uid of the process

pid_suid pid

The saved set uid of the process

pid_fsuid pid

The file system uid of the process

pid_gid pid

The real gid of the process

pid_egid pid

The effective gid of the process

pid_sgid pid

The saved set gid of the process

pid_fsgid pid

The file system gid of the process

pid_vmpeak pid

Peak virtual memory size of the process

pid_vmsize pid

Virtual memory size of the process

pid_vmlck pid

Locked memory size of the process

pid_vmhwm pid

Peak resident set size ("high water mark") of the process

pid_vmrss pid

Resident set size of the process

pid_vmdata pid

Data segment size of the process

pid_vmstk pid

Stack segment size of the process

pid_vmexe pid

Text segment size of the process

pid_vmlib pid

Shared library code size of the process

pid_vmpte pid

Page table entries size of the process

pid_write pid

Total number of bytes written by the process

platform (dev) type n (factor offset)

Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one platform device. Platform type is either ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ meaning temperature. Parameter n is number of the sensor. See /sys/bus/platform/devices/ on your local computer. The optional arguments ’factor’ and ’offset’ allow precalculation of the raw input, which is being modified as follows: ’input = input * factor + offset’. Note that they have to be given as decimal values (i.e. contain at least one decimal place).

pop3_unseen (args)

Displays the number of unseen messages in your global POP3 inbox by default. You can define individual POP3 inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e ’command’] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

pop3_used (args)

Displays the amount of space (in MiB, 2^20) used in your global POP3 inbox by default. You can define individual POP3 inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e ’command’] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as ’*’, you will be prompted to enter the password when Conky starts.

pre_exec shell command

Executes a shell command one time before conky displays anything and puts output as text.

processes

Total processes (sleeping and running)

read_tcp (host) port

Connects to a tcp port on a host (default is localhost), reads every char available at the moment and shows them.

replied_mails (maildir) (interval)

Number of mails marked as replied in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1.

rss uri interval_in_minutes action (num_par (spaces_in_front))

Download and parse RSS feeds. The interval may be a floating point value greater than 0, otherwise defaults to 15 minutes. Action may be one of the following: feed_title, item_title (with num par), item_desc (with num par) and item_titles (when using this action and spaces_in_front is given conky places that many spaces in front of each item). This object is threaded, and once a thread is created it can’t be explicitly destroyed. One thread will run for each URI specified. You can use any protocol that Curl supports.

running_processes

Running processes (not sleeping), requires Linux 2.6

running_threads

Number of running (runnable) threads. Linux only.

scroll length (step) text

Scroll ’text’ by ’step’ characters showing ’length’ number of characters at the same time. The text may also contain variables. ’step’ is optional and defaults to 1 if not set. If a var creates output on multiple lines then the lines are placed behind each other separated with a ’|’-sign. If you change the textcolor inside $scroll it will automatically have it’s old value back at the end of $scroll. The end and the start of text will be separated by ’length’ number of spaces.

seen_mails (maildir) (interval)

Number of mails marked as seen in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1.

shadecolor (color)

Change shading color

smapi (ARGS)

when using smapi, display contents of the /sys/devices/platform/smapi directory. ARGS are either ’(FILENAME)’ or ’bat (INDEX) (FILENAME)’ to display the corresponding files’ content. This is a very raw method of accessing the smapi values. When available, better use one of the smapi_* variables instead.

smapi_bat_bar (INDEX),(height),(width)

when using smapi, display the remaining capacity of the battery with index INDEX as a bar.

smapi_bat_perc (INDEX)

when using smapi, display the remaining capacity in percent of the battery with index INDEX. This is a separate variable because it supports the ’use_spacer’ configuration option.

smapi_bat_power INDEX

when using smapi, display the current power of the battery with index INDEX in watt. This is a separate variable because the original read out value is being converted from mW. The sign of the output reflects charging (positive) or discharging (negative) state.

smapi_bat_temp INDEX

when using smapi, display the current temperature of the battery with index INDEX in degree Celsius. This is a separate variable because the original read out value is being converted from milli degree Celsius.

sony_fanspeed

Displays the Sony VAIO fanspeed information if sony-laptop kernel support is enabled. Linux only.

stippled_hr (space)

Stippled (dashed) horizontal line

swap

Amount of swap in use

swapbar (height),(width)

Bar that shows amount of swap in use

swapfree

Amount of free swap

swapmax

Total amount of swap

swapperc

Percentage of swap in use

sysname

System name, Linux for example

tab (width, (start))

Puts a tab of the specified width, starting from column ’start’. The unit is pixels for both arguments.

tail logfile lines (next_check)

Displays last N lines of supplied text file. The file is checked every ’next_check’ update. If next_check is not supplied, Conky defaults to 2. Max of 30 lines can be displayed, or until the text buffer is filled.

tcp_portmon port_begin port_end item (index)

TCP port (both IPv6 and IPv4) monitor for specified local ports. Port numbers must be in the range 1 to 65535. Valid items are:

count Total number of connections in the range
rip Remote ip address
rhost Remote host name
rport Remote port number
rservice Remote service name from /etc/services
lip Local ip address
lhost Local host name
lport Local port number
lservice Local service name from /etc/services

The connection index provides you with access to each connection in the port monitor. The monitor will return information for index values from 0 to n-1 connections. Values higher than n-1 are simply ignored. For the "count" item, the connection index must be omitted. It is required for all other items.

Examples:

${tcp_portmon 6881 6999 count} Displays the number of connections in the bittorrent port range
${tcp_portmon 22 22 rip 0} Displays the remote host ip of the first sshd connection
${tcp_portmon 22 22 rip 9} Displays the remote host ip of the tenth sshd connection
${tcp_portmon 1 1024 rhost 0} Displays the remote host name of the first connection on a privileged port
${tcp_portmon 1 1024 rport 4} Displays the remote host port of the fifth connection on a privileged port
${tcp_portmon 1 65535 lservice 14} Displays the local service name of the fifteenth connection in the range of all ports

Note that port monitor variables which share the same port range actually refer to the same monitor, so many references to a single port range for different items and different indexes all use the same monitor internally. In other words, the program avoids creating redundant monitors.

templateN (arg1) (arg2) (arg3 ...)

Evaluate the content of the templateN configuration variable (where N is a value between 0 and 9, inclusively), applying substitutions as described in the documentation of the corresponding configuration variable. The number of arguments is optional, but must match the highest referred index in the template. You can use the same special sequences in each argument as the ones valid for a template definition, e.g. to allow an argument to contain a whitespace. Also simple nesting of templates is possible this way.

Here are some examples of template definitions:

template0 $\1\2
template1 \1: ${fs_used \2} / ${fs_size \2}
template2 \1 \2

The following list shows sample usage of the templates defined above, with the equivalent syntax when not using any template at all:

LUA API

EXAMPLES

FILES

BUGS

SEE ALSO

COPYING

AUTHORS